|
|
StarGPS
1000 StarGPS Package $280AUD
1010 StarGPS Handheld Package (eTrex) $215AUD
1011 StarGPS Handheld Package (Garmin) $215AUD
1012 StarGPS Handheld Package (Magellan) $215AUD
1013 StarGPS Handheld Package (Rino) $215AUD
1040 StarGPS-NX Package (ASTAR) $215AUD
1041 StarGPS-NX Package (LX200) $215AUD
1042 StarGPS-NX Package (Gemini) $215AUD
1043 StarGPS-NX Package (NexStar) $215AUD
1044 StarGPS-NX Package (Synta) $215AUD
1045 StarGPS-NX Package (494) $215AUD
1046 StarGPS-NX Package (Astro) $215AUD
1047 StarGPS-NX Package (GeminiDC) $215AUD
1048 StarGPS-NX Package (StarBook) $339AUD
1049 StarGPS-NX Package (Gemini2) $215AUD
Add GPS to your telescope!
Our new 16-channel GPS-NX01 receiver works with the Astro-Physics GTO, Celestron NexStar,
Losmandy Gemini, Meade 494/497/497EP Autostar, LX200 Classic, Orion Atlas/Sirius GoTo,
Sky-Watcher SynScan, Vixen StarBook and StarBook Type-S
The GPS receiver is smaller than a computer mouse (shown with ETX-90EC).
StarGPS-NX is the "plug-and-play" solution for your Astro-Physics GTO, Celestron NexStar,
Losmandy Gemini, Meade 494 Autostar, Meade 497/497EP Autostar, LX200 Classic, Orion Atlas/Sirius GoTo,
Sky-Watcher SynScan, Vixen StarBook and StarBook Type-S. It includes a GPS-NX01 receiver and your
choice of one adapter cable. No software is required since the GPS receiver outputs commands and
data that the telescope already understands (see "Using StarGPS-NX"). Simply connect the GPS to your
telescope, turn on the scope, and watch the GPS LED indicate:
power-on, location determined and setup complete
The StarGPS-NX Package includes:
High performance GPS-NX01 receiver
One cable to connect the GPS to your telescope/controller:
GPS-ASTAR - Meade 497/497EP Autostar (ETX/LXD/LX90)
GPS-494 - Meade 494 Autostar* (ETX60/70/80, DS2000)
GPS-Astro - Astro-Physics GTO
GPS-LX200 - Meade LX200 Classic
GPS-Gemini - Gemini with 4-pin DIN power jack
GPS-GeminiDC - Older Gemini with 1-pin DC power jack
GPS-NexStar - Celestron NexStar hand control**
GPS-StarBook - Vixen StarBook adapter and cable
GPS-Synta - Orion Atlas/Sirius or Sky-Watcher SynScan***
GPS-USB - Windows PC connected mount
* Requires Meade #506 Cable Connector Kit
** Requires firmware version 2.3, 104.0 or 4.0+
(includes a 6p6c splitter for use with GT, AS-GT, CG5)
*** Requires firmware version 3.10+ or AZ 3.03+
StarGPS is designed for use with any 497/497EP Autostar controlled telescope like the
Meade LXD55/75, LX90 and ETX series. It includes a GPS-NX01 receiver, adapter cable,
StarPatch software and serial cable. StarPatch uses your Windows PC to perform a one-time,
quick and easy installation that reprograms the Autostar to accept GPS data (see "Using StarGPS").
You can then connect the GPS to your telescope, turn the scope on, and watch as the Autostar
displays incoming GPS data (time, # satellites and signal strength as shown below). Once a
location fix is obtained the Autostar will beep, display the results and skip ahead to the
"Align:" prompt. If you already own a Garmin or Magellan GPS (with RS232 output) then you may
prefer the StarGPS Handheld Package.
The StarGPS Package includes:
High performance GPS-NX01 receiver
GPS-ASTAR cable to connect the GPS to the Autostar
StarPatch software registration key to add GPS Setup capability to one Autostar 497/497EP
PC-ASTAR cable to connect your PC to the Autostar
The StarGPS Handheld Package includes:
StarPatch software registration key to add GPS Setup capability to one Autostar 497/497EP
PC-ASTAR cable to connect your PC to the Autostar
A cable to connect your GPS RS232 output to the Autostar:
eTrex-ASTAR - for Garmin eTrex, eMap or Geko GPS
Garmin-ASTAR - for most other Garmin GPS
Magellan-ASTAR - for Magellan GPS
Rino-ASTAR - for Garmin Rino GPS
For more details see the Star GPS Web Site.
Telescope Models
Astro-Physics GTO is provided with the following mounts:
400GTO, 600EGTO, 900GTO, 1200GTO with GTOCP2
1200GTO, Mach1GTO with GTOCP3
Celestron NexStar controlled telescopes are manufactured by Celestron and include the models listed below.
StarGPS-NX requires NexStar hand control firmware version 2.3, 104.0 or 4.0+ as displayed using the hand
control "Utilities: Version" menu item.
NexStar GT or StarSeeker
NexStar iSeries
NexStar SLT
NexStar SE
Advanced Series GT (CG5 mount)
CGE Series
CGE Pro Series
CGEM Series
CPC Series (with built-in GPS)
NexStar GPS (with built-in GPS)
Gemini Astronomical Positioning System is provided with the following mounts:
Losmandy GM-8, G-11, Titan and HGM-200
Mountain Instruments MI-250
Meade Autostar 497/497EP controlled telescopes are manufactured by Meade Instruments Corporation and
include the following models:
ETX Premier Edition Telescopes
LT-6 Telescope
LX90-LNT Schmidt-Cassegrain Telescopes
LXD75 Series Telescopes
ETX-90, ETX-105 and ETX-125 Astro Telescopes
8" LX90 Schmidt-Cassegrain Telescope
LXD55 8" SC-8 Schmidt-Cassegrain Telescope
LXD55 Schmidt-Newtonians and Refracting Telescopes
Meade Autostar 494 controlled telescopes require a Meade #506 Cable Connector Kit (serial adapter cable)
to interface with StarGPS-NX and include:
DS-2000 Series Telescopes
ETX-80 Telescope
ETX-60 and ETX-70 Telescopes
DS Series Telescopes
Orion Atlas/Sirius GoTo and Sky-Watcher SynScan controlled telescopes include the models listed below.
StarGPS-NX requires a hand controller with firmware version 3.10+ or AZ 3.03+.
Orion Atlas/Sirius EQ-G and SkyView Pro
Sky-Watcher EQ-3/5/6 SynScan
Vixen StarBook and StarBook Type-S controlled mounts include the models listed below. StarGPS-NX requires
a StarBook with firmware version 1.2 build 31 or newer as displayed using the "About StarBook" menu item.
Vixen Sphinx SX, SXD or Atlux
Vixen Skypod, GP2 or GPD2
|